Announcement

Collapse
No announcement yet.

z32 brake question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • z32 brake question

    Hi , on my 86 z31 I have swapped the z32 4 piston caliper , but was wondering , should I install the z32 master cylinder too , or keep the z31 mc , the rear brakes are still stock n/a ones . Anyone already tested this? thx
    1986 GLL VQ35DE(287hp) / Z33 6S tranny, done!
    Black 240sx 1997 (ka24de)5S daily driver.

  • #2
    so anybody? I think I will have to test it then.
    1986 GLL VQ35DE(287hp) / Z33 6S tranny, done!
    Black 240sx 1997 (ka24de)5S daily driver.

    Comment


    • #3
      z

      Comment


      • #4
        thats what I want to know , when you say better pedal feeling , is it braking only at the end of the course of the pedal , with the z31 mc? If so maybe i should install the z32 unit.
        1986 GLL VQ35DE(287hp) / Z33 6S tranny, done!
        Black 240sx 1997 (ka24de)5S daily driver.

        Comment


        • #5
          z

          Comment


          • #6
            hi how did you fit the z32 brakes.
            do they just bolt up?

            Comment


            • #7
              elsestuff wrote: hi how did you fit the z32 brakes.
              do they just bolt up?
              If you already have the front hubs from a 87 + turbo ,yes they bolt up , because if you don t then you will have the other hub type with the front rotor bolted on it. For the z32 caliper to be properly centered you will need some washers.
              1986 GLL VQ35DE(287hp) / Z33 6S tranny, done!
              Black 240sx 1997 (ka24de)5S daily driver.

              Comment


              • #8
                Hey folks.. I have an 88 NA GLL , I need turbo front strut tubes for these brakes right?

                Comment


                • #9
                  z

                  Comment


                  • #10
                    cool... thanks

                    Comment

                    Working...
                    X