ok so i bought a nice Unit and was very excited to install it, then a friend shattered my dreams of doing it by saying i would need a high flow oil pump for it to make enough pressure for the oil to travel through!
can anyone elaborate on this!
should i bite the bullet and get a New oil pump?, the engine is not in the car right now!
or can teh stock oil pump provide me with enough pressure to flow the oil through the cooler and back!
here are some specs to my cooler kit!
19 Rows ,10" x 5 1/2" x 2" Core an Overall measurements 11 1/4" x 5 1/2" x 2" , has -10AN fittings
Braided Stainless Steel Hoses, 7/8" OD (Outside Diamater),
or check here for more specs
http://cgi.ebay.com/ebaymotors/PERFORMA ... enameZWDVW
can anyone elaborate on this!
should i bite the bullet and get a New oil pump?, the engine is not in the car right now!
or can teh stock oil pump provide me with enough pressure to flow the oil through the cooler and back!
here are some specs to my cooler kit!
19 Rows ,10" x 5 1/2" x 2" Core an Overall measurements 11 1/4" x 5 1/2" x 2" , has -10AN fittings
Braided Stainless Steel Hoses, 7/8" OD (Outside Diamater),
or check here for more specs
http://cgi.ebay.com/ebaymotors/PERFORMA ... enameZWDVW
Comment