Announcement

Collapse
No announcement yet.

Oil Pressure Sending unit thread size

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oil Pressure Sending unit thread size

    Man!
    *I have searched and for the life of me, cannot find what I read not to very long ago.
    I think it was Jason that posted the thread size and pitch.
    *I'm wanting to know so I can buy the appropiate adapter to put in an aftermarket oil pressure gauge.

    Anyone?
    I am here to help...

  • #2
    check this website out then click accessories and look there

    http://moredhel.net/3z/

    hope this helps

    Comment


    • #3
      AHhhh!
      Thank You Sir!

      1/8" BSPT
      oil sender port thread size for all VG30.

      M16 1.5
      oil temperature sensor bung


      *(I slapped the info. here for future searches)
      I am here to help...

      Comment


      • #4
        Not a problem

        Comment


        • #5
          Yeah I just had this problem recently. Now try to find an adaptor to go from 1/8" bspt to 1/8" NPT. Good luck. I ended up carefully tapping mine out to 1/8" Npt

          I asked for an adaptor at one of the big boy v8 shops and they ended up giving me a 1/8"Npt male to adapt to an 1/8"BSPT. Why the hell would anyone want to run the BSPT if they allready have NPT? WTF? Either way. I tapped mine with lots of grease and took about 15mins pulling it out after about one rotation of the tap each time being carfull not to get shavings into the oil passage. Use lots of grease.

          Or just search and search and search for an adaptor. I gave up. 1/8" NPT is readily available so I figured I would make this a permanent part of my car.
          85 Z31 6.0 LSX turbo 766whp/792wtq
          04 GTO, LS6, big cam, porting, N20... underway for summertime daily driver.

          Comment


          • #6
            Dan-TSS wrote: AHhhh!

            M16 1.5
            oil temperature sensor bung[/b]
            we have an oil temp sensor? or is that aftermarket?
            Lance 'never-ending 88na2t project' Landry
            I sell Z stuff when I'm not being lazy.
            Trace cell phones via GPS: http://www.phonetrace.org

            Comment


            • #7
              [quote]Lance wrote:
              Originally posted by Dan-TSS
              AHhhh!

              M16 1.5
              oil temperature sensor bung[/b]


              we have an oil temp sensor? or is that aftermarket?
              wouldnt that be the one on the oil pan next to the drain plug. you know the one that allway just looks like another plug with what used to be a wire attatched to it. At least I think thats it.
              85 Z31 6.0 LSX turbo 766whp/792wtq
              04 GTO, LS6, big cam, porting, N20... underway for summertime daily driver.

              Comment

              Working...
              X