Announcement

Collapse
No announcement yet.

okay a little help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • okay a little help

    what parts of the Z32 bolt into the Z31.

    i was thinking the Turbo Shifter will work in a Z31 turbo. like B&M racing

    how about the seats?

    is the steering wheel spline and diameter the same????

    thanks

  • #2
    84z31 wrote: what parts of the Z32 bolt into the Z31.

    i was thinking the Turbo Shifter will work in a Z31 turbo. like B&M racing

    how about the seats?

    is the steering wheel spline and diameter the same????

    thanks
    The transmissions are basically identical on the Z32 whether TT or NA.

    Shifter will not fit.

    Seats can fit with some custom work with the rails.

    Steering wheel SHOULD slide over the splines.

    Things you missed:

    The complete rear subframe CAN be swapped. Again, a little custom work. Check the specific thread for more information.

    Z32 wheels. (small spacers required)

    The tension rod style is the same as the late 87+ turbo. However, it doesn't mount the same.

    Fuel filter.

    Brake Calipers.

    Fuel pump.

    Pistons and rods. I think crank as well.

    I'll think of more later on.
    Originally posted by Andrew84zx
    tell her your car is so fast it will make her panties fly off
    545 RWHP & 540 RWTQ

    Comment


    • #3
      thanks.

      i know of a few Z32s in salt lake. maybe seats.

      how about 240sx???

      Comment


      • #4
        84z31 wrote: thanks.

        i know of a few Z32s in salt lake. maybe seats.

        how about 240sx???
        Steering wheel fits the same.

        The 5 speed is the FS5W71C.

        Bolt pattern is the same as 84-85 NA Z31's.

        Of course the throttle body swaps over.

        I'm sure there a couple things that could be useful.
        Originally posted by Andrew84zx
        tell her your car is so fast it will make her panties fly off
        545 RWHP & 540 RWTQ

        Comment


        • #5
          does the rear diff bolt in??

          then i coult just get the driveshaft resized. i found a VSLD :!:

          Comment


          • #6
            [quote]FlawleZ wrote:
            Originally posted by 84z31
            thanks.

            i know of a few Z32s in salt lake. maybe seats.

            how about 240sx???
            Steering wheel fits the same.

            The 5 speed is the FS5W71C.

            Bolt pattern is the same as 84-85 NA Z31's.

            Of course the throttle body swaps over.

            I'm sure there a couple things that could be useful.
            What bolt pattern?
            Lance 'never-ending 88na2t project' Landry
            I sell Z stuff when I'm not being lazy.
            Trace cell phones via GPS: http://www.phonetrace.org

            Comment


            • #7
              bah nevermind

              Comment


              • #8
                [quote]Lance wrote: [quote=FlawleZ]
                Originally posted by 84z31
                thanks.

                i know of a few Z32s in salt lake. maybe seats.

                how about 240sx???
                Steering wheel fits the same.

                The 5 speed is the FS5W71C.

                Bolt pattern is the same as 84-85 NA Z31's.

                Of course the throttle body swaps over.

                I'm sure there a couple things that could be useful.
                What bolt pattern?
                I'm sorry. It was totally in my head what I was implying.

                The wheel
                bolt pattern is the same and the wheels are interchangeable.
                Originally posted by Andrew84zx
                tell her your car is so fast it will make her panties fly off
                545 RWHP & 540 RWTQ

                Comment


                • #9
                  no a 240sx rear differential wont bolt in. Only thing you can do considering the 300zx and 240sx diffs are both R200's is swap the VLS differential itself and picion from the 240sx into the 300zx housing, and you would need to run 88ss axles which cost shitloads. The 240zx diff housing has different mounting points than the 300zx, this is why. Also many infinities have R200 diff internals that will swap over, i think the J30 and some others do....

                  Comment


                  • #10
                    which j30s have vslds?

                    Comment


                    • #11
                      roastin300 wrote: no a 240sx rear differential wont bolt in. Only thing you can do considering the 300zx and 240sx diffs are both R200's is swap the VLS differential itself and picion from the 240sx into the 300zx housing, and you would need to run 88ss axles which cost shitloads. The 240zx diff housing has different mounting points than the 300zx, this is why. Also many infinities have R200 diff internals that will swap over, i think the J30 and some others do....
                      Who said a 240SX Differential WOULD bolt in?
                      Originally posted by Andrew84zx
                      tell her your car is so fast it will make her panties fly off
                      545 RWHP & 540 RWTQ

                      Comment


                      • #12
                        84z31 asked that dude....

                        Terrible idea putting those wheels on...

                        Comment


                        • #13
                          MrwassmanNA2T wrote: 84z31 asked that dude....
                          Oh I totally missed that. :shock:
                          Originally posted by Andrew84zx
                          tell her your car is so fast it will make her panties fly off
                          545 RWHP & 540 RWTQ

                          Comment


                          • #14
                            haha, wish i had magic unversal diff powers.

                            Terrible idea putting those wheels on...

                            Comment


                            • #15
                              MrwassmanNA2T wrote: haha, wish i had magic unversal diff powers.
                              It's called a live axle and ford 9 inch. That's as universal as you can get, and there's 4324585298475 LSD options.

                              Comment

                              Working...
                              X