Skyline R32 LSD

[300zxmaniak]

Ok i was cheking on ebay at crap and came across 2 skyline r32 lsds one was the r200 wich we have the other was a 5bolt VLSD well so they listed with a 4.36 ratio would this work in our cars i know visualy its identicle just wandering if anyone tryed or even knew about it.

here is the ebay link if someone wants to have a look
http://cgi.ebay.com/ebaymotors/JDM-Niss ... 6580QQrdZ1

[MrwassmanNA2T]

wow, that does look identical

[GotFast?]

The axles are bass ackwards from what we have on our cars.

You would have to find out what the spline count was in that diff and if you can pull out those 5 bolt stubshafts and slip our axles in.

[bemis]

only the VLSD unit is usable.

you would need to pull the VLSD unit out of that pumpkin and put it into yours.

you would maintain the original ratio of the Z31 pumpkin.

you will need Z31 VLSD halfshafts to connect the pumpkin to the hubs.

[300zxmaniak]

i just wasnt sure if you guys have looked at um i did notice the different axles though maybe some further research on the diff can figure out a way to utilize the r32 diffs without guting it.

[Racinjitter]

Just FYI R32 GTR's came with CLSD not VLSD.

[Chris86NA2T]

MrwassmanNA2T wrote: wow, that does look identical

how does that look identical? have you ever looked at the r200 under a z31?

[mgp87zxt]

Posted: Sat Nov 25, 2006 6:18 pm Post subject:

--------------------------------------------------------------------------------

Just FYI R32 GTR's came with CLSD not VLSD.

The 4.36 is out of a R32 gtst and is a vlsd, the r32 gtr has the 4.11 clsd if I am correct

[OR-Zman]

[quote]Chris86NA2T wrote:

wow, that does look identical
how does that look identical? have you ever looked at the r200 under a z31?

Easy now Chris....Just offset and swap a couple things 180 and its pretty close. :shock:

maniak- not a bad idea but...no.