So, I've got the bushings mixed up. Does anyone know the part numbers for the differing inners and outers? I think the last two digits on the different bushings are 97 and 99. Thanks.
Announcement
Collapse
No announcement yet.
rear poly control arm
Collapse
X
-
rear poly control arm
Lance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Tags: None
-
"The inner bushings have a larger internal diameter, the instructions explain which bushing goes where so I won’t get into that here. (Note: some cars have outer bushings that are the same as the inner bushings, Prothane will gladly correct this issue if you have one of the kits with the differently sized bushings."
From Jason's write-up... except my bushings did not come with any instructionsLance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
-
apparently there's four different number on two each. 64297, 64298, 64299, 64300Lance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Comment
-
I figured it out, 97 and 98 seem to be the thicker bushings for the outers, and vice versa
Thank you dial caliperLance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Comment
Comment