Announcement

Collapse
No announcement yet.

84-86 z31 turbo SB clutch in 92 pathfinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 84-86 z31 turbo SB clutch in 92 pathfinder

    My plan, so far if this post turnes up something I haven't realize yet, is to get a flywheel for a 84-86 300zx and a SB stage 3 endurance clutch.

    Since mine is the same as the 87-89 flywheel and there isnt a clutch rated for what I want I figured it would work, not really interested in a different brand because from what I have read many of them have a nasty pedal and aren't intended for ralley/endurance.

    I'm pretty sure the 30a and the 71c (and I dont think there is a differance between the z31 30a and the pathfinder/hardbody/fronteir/xtera the z32 is different due to the flywheel starter teeth being different but all being a 250mm) have the same bolt patterns bell to engine and I'm pretty sure the input shaft is the same of the two transmissions. Considering all that I'm pretty sure the flywheel is the same between z31 30a and my pathfinder.

    unless someone knowns if I can just install a z32 SB stage 3 onto my flywheel and call it a day.


  • #2
    The spline count on the Friction disk should be the same but I think pressure plate bolt pattern will be different even. A safest bet I think would be to match the clutch kit to the flywheel and verify the outside diameter matches your pathfinder diameter for proper starter teeth engagement.

    You can also have a machine shop redrill flywheel and balance it.
    Own:
    1986 Z31 2+0 Turbo GLL ---- spearco IC ,3" exhaust, Poly everything with solid subframe and diff mounts, HX35/40 Holset Turbo, CLSD, Nistune with 1220cc FIC injectors on E85.
    1993 Jeep Cherokee 4X4
    Owned:
    1995 Z32 2+0 NA Black
    1985 Z31 2+0 turbo Black
    1986 Z31 2+0 NA Red
    1988 Z31 2+2 NA Auto
    1988 Z31 2+0 Turbo White ---- Stripped for all of its goodies.
    1984 Z31 2+0 turbo Brown
    1985 Z31 2+0 NA Black
    2003 Nissan frontier D22 supercharded vg33e 4x4

    Comment


    • #3
      Also, Z31 flywheel/crank bolt pattern (6bolt) is different than Z32 (8bolt)


      84 AE/Shiro #683/Shiro #820/84 Turbo

      Comment


      • #4
        Clutch Speciality (call em up) can make you up a clutch to fit your needs at better price than SB. I had them make a clutch kit for my turbo 2+2 with 87-89 flywheel /30a. Feels like stock with absolutely no slippage. And I'm running at higher than stock HP
        Last edited by Augustus Maximus; 10-27-2019, 11:08 AM.
        Cha iro

        enjoy building it yourself.
        if it fails, fuck it.
        at least you gave it a whirl.

        Comment

        Working...
        X