K value for 420 ccm Injectors and Z32 AFM

[Dino]

thanks

[t70]

k value about 0130 hex to 0150 hex should work.. then check with your wideband to see how close you are. Don't forget to adjust your latency to about 57 and don't forget about ttp min/max.

[Dino]

I finally will install my 420cc Benz injectors today. With the Z32-AFM swap i still want to wait some days until i have the impression that the injectors work well and next step can be done.

So i had two requests to the those here around who are also using the combination Z32 AFM and Benz-Injectors (stinky, ...).

1. your recommended K-Value with benz-injectors and stock afm, stock fuel pressure. (around ´260´?)

2. Your recommended K-value with benz-injectors and Z32 AFM, stock fuel pressure. (maybe your entire tables and values that have been changed?)

As this is my first time tuning a bigger afm and inj. by myself i hope i had collected enough theoretical knowledge to go for that, but if you could give me kind of a startup recommendation so that at least the engine will start and run clean having a base for fine and finest tuning.

Thanks