Announcement

Collapse
No announcement yet.

s-afc install -- ECU pin help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • s-afc install -- ECU pin help please

    no flames necessary for using the safc, I just need your help with the ecu pins.

    I need the ECU pins/wires for rpm, knocking signal, ground, throttle signal, airflow signal and IG power.

    Thanks.
    2008 BMW E92 335i 6MT

  • #2
    9 threads down from this one....read
    (check what I had to comment about on z31.com too)
    :lol:
    I am here to help...

    Comment


    • #3
      Red 34
      Green - 17 G/B
      Purple - 21 W
      Blue - 24 B
      white & yellow - 31B (cut 31B , white input and yellow output from apexi)
      Brown - 28B
      Black/brown - 28B 1inch away from Brown

      Edit: check and double-check everything, This is my notes from back when I used a S-AFC2 in my -85T.. And hey, No flaming needed. The AFC works great!

      http://Jocke.z31turbo.com 11.842s car
      http://www.youtube.com/watch?v=UfRwqC3jkAk
      If Nissan motorsports is Nismo, wouldn't Honda Motorsports be Homo?

      Comment


      • #4
        thanks guys
        2008 BMW E92 335i 6MT

        Comment


        • #5
          Hey, did you get this installed ok man? Just curious.

          Ive been using an afc for a couple years now and its worked great!!
          Who are you to tell me my uninformed opinion is wrong?!?!?

          Expert: He who has made all the mistakes there is to make in a given field.

          Comment


          • #6
            TODD03412 wrote: Hey, did you get this installed ok man? Just curious.

            Ive been using an afc for a couple years now and its worked great!!
            hey todd, I haven't installed it yet...been busy at work. I'm glad to see someone else here using one, especially seeing you're in florida. You going to Z Fest?
            2008 BMW E92 335i 6MT

            Comment


            • #7
              When, Where, WHY HAVENT I BEEN TOLD!!! HAHA


              I have been using the AFC for a few years now(stole it off my NX2000 I used to autox till an slight rollover mishap I have just recently started getting serious about making power when I started researching stuff on Z31.com and found Jasons site!!!
              For what i want to do right now it works GREAT!!!! I couldnt be happier with it. Im going to need another way to tune though when Im finished with my other motor and I put the Holset I have on..........and five speed (I dont think my auto tranny is going to last very much longer ha-ha)
              Who are you to tell me my uninformed opinion is wrong?!?!?

              Expert: He who has made all the mistakes there is to make in a given field.

              Comment


              • #8
                I have an safc2 as well and was wondering on the sensor type if it is # 6 and 6 after you set it to hot wire?

                Comment


                • #9
                  I think this should be nominated for the biggest necro of all time. I picked up the first reply from Dan-TSS and was like WHAAA???
                  88SS - #300 - http://z31performance.com/showthread.php?18360

                  Comment


                  • #10
                    But it means they searched!
                    BLOZ UP.com
                    It is not recommended to confirm proper installation by driving into walls or other barriers as this could cause personal injury or damage to the vehicle.

                    Comment

                    Working...
                    X