Tweet
I'm curious- at what RPM's does everyone turbos start spooling up, and what turbo? It's not something I hear much of.
-
Lance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
-
start spooling or hit full boost?
Terrible idea putting those wheels on... -
begin spooling, i.e. boost starts coming onLance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Comment
-
I start spooling as soon as I start moving. I start making boost probably somewhere around 2000rpm maybe
Full boost hits 12psi on a stock T3 at about 2600rpm in 3rd gear. Filter on the MAF and no exhaust.
Comment
-
Yeah I'm spooling almost instantly. I'm making low boost ~5 psi at 1700 rpms.545 RWHP & 540 RWTQOriginally posted by Andrew84zx
tell her your car is so fast it will make her panties fly off
Comment
-
Stage 3 turbine, stock housing. 60-1 compressor.
Depends on the gear you are in, but it gets 1-2PSI at 1800-2000rpm and steadily builds. This is going off memory but it's something like:
10PSI by 3000rpm
15PSI by 3800rpm
21PSI by 4500rpm
It's a little odd how it spools. Lots of more efficient turbochargers will build boost almost instantly if they are sufficiently over the threshold RPM. I think the larger compressor and small turbine housing has a lot to do with the strange-ish boost response.Comment
Comment