Announcement

Collapse
No announcement yet.

z32 hubs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • z32 hubs

    would z32 hubs work on a z31 in order to do the 350z tack rotor and 30mm caliper mod?
    Andrew

  • #2
    I think you need the 87-89 Turbo hubs to fit Z32 brakes or any brake kit that fits the Z32.

    Comment


    • #3
      no, you just can't use slip on rotors without modifying the hubs

      Comment


      • #4
        slipon

        what kind of modifications would i need to perform?
        basically its 88/89 turbo hubs or nuthin
        Andrew

        Comment


        • #5
          Re: slipon

          CanadianZ wrote: what kind of modifications would i need to perform?
          basically its 88/89 turbo hubs or nuthin
          87 will work as well... consider z32 calipers and rotors before you go crazy with the 350z stuff. i can see that getting expensive.. i have z32 front calipers and brmbo rotor, z31 vented rear rotors with z32 rear calipers, braided lines, nice clean fluid and porterfield R-4S pads. with 255 tires my brakes are powerful enough to pull me up out of my seat. its all about tire size and pad material, the 2 most overlooked items in a brake upgrade. good luck with whatever you do, post pics

          Comment


          • #6
            Doesn't jasons ride have some really good stopping numbers?

            Terrible idea putting those wheels on...

            Comment


            • #7
              rotor

              i am going to use z32 calipers but i want the 12.75inch 350z track rotor.
              the rear will probably be z32 calipers, and an alternative parking brake solution.
              i just want massive front rotors.....
              Andrew

              Comment


              • #8
                Re: rotor

                CanadianZ wrote: i just want massive front rotors.....
                http://www.redz31.com/forum/viewtopic.php?t=1703 8)
                Jukka Kivinen - Europe / Finland - '88 Turbo 2+2 Targa
                Datsun Nissan Sports Cars of Finland
                http://www.z31turbo.com / http://www.z31na.com

                Comment


                • #9
                  Re: rotor

                  CanadianZ wrote: i am going to use z32 calipers but i want the 12.75inch 350z track rotor.
                  the rear will probably be z32 calipers, and an alternative parking brake solution.
                  i just want massive front rotors.....
                  Just run one of those hydraulic parking brakes that branch off to the rear only

                  Terrible idea putting those wheels on...

                  Comment


                  • #10
                    hydraulic

                    I don't want to rely on the master cylinder as a emergency brake. it operates on a couple of flimsy seals. I want mechanical park brake. but i have a cool idea.
                    Attached Files
                    Andrew

                    Comment


                    • #11


                      HAHAHA!
                      Attached Files
                      Drive


                      1975 Datsun 280Z
                      1988 300ZX (NAtoT soon)
                      2006 Kawasaki ZX6R

                      Comment


                      • #12
                        every z31 came with wheel chocks in the trunk.... you could use them

                        Comment


                        • #13
                          Re: rotor

                          CanadianZ wrote:
                          i just want massive front rotors.....
                          You could do this http://www.ztuner.com/brakes.php
                          You would have to space the brackets as you would the calipers without them.
                          Attached Files
                          imagination is a virtue

                          Comment


                          • #14
                            Re: hydraulic

                            CanadianZ wrote: I don't want to rely on the master cylinder as a emergency brake. it operates on a couple of flimsy seals. I want mechanical park brake. but i have a cool idea.
                            1st gear?

                            Terrible idea putting those wheels on...

                            Comment


                            • #15
                              http://www.mwsmotorsports.com/products/ ... ucts_id=28

                              FTW

                              Comment

                              Working...
                              X