Where are you guys getting urethane rear sway bar bushings and the urethane links from? Everyone around me and that I can find online only has them in rubber, or doesnt even have them at all.
Announcement
Collapse
No announcement yet.
Rear sway bar bushings
Collapse
X
-
MSA should have them in Urethane.
You should learn this concept early:
There are no kits for a z31. There are very few performance parts for a z31. You will have to think about the situation and make stuff work on a z31.
There really are a lot of parts out there you can use on a z31. Unfortunately they are all either not listed to work with it, or not intended but with minimal "tweaking" will work fine.
Go look at the bar and do some measuring, then go down to vato-zone and look at the parts they have on the shelf.
-
Steve88t wrote:
You should learn this concept early:
There are no kits for a z31. There are very few performance parts for a z31. You will have to think about the situation and make stuff work on a z31.
There really are a lot of parts out there you can use on a z31. Unfortunately they are all either not listed to work with it, or not intended but with minimal "tweaking" will work fine.
Go look at the bar and do some measuring, then go down to vato-zone and look at the parts they have on the shelf.Attached Files
Comment
Comment