help w/ removing fron spring/strut assembly

[Idryfly5]

im following the hayne's manual and have everything unbolted that says is needed, and still cannot get it out of the car. any tips to this

[Jason84NA2T]

Usually it's seperating the lopwer part of the strut housing/spindle from the steering knuckle. Give it a few taps with a hammer and hit it with penetrant like PB Blaster.

[Idryfly5]

finally, sprayed it w/ some penetrant, threw on some Killswitch Engage, and made that assembly my bitch. :twisted:

[Firehawk]

I have had some that were really stuck on. I use an air hammer, and they come apart just fine.