I've been having a brake issue ever since switching to 88t rotors up front. The brakes work, but the pedal feel is REALLY Mushy, to the point where, if you really stand on them, you can hit the floor. They really don't pump up. I've replaced the master (with the one off the 88t parts car), thinking this was the likely cause, but even after bench bleeding, breech bleeding, and bleeding a quart of fluid out of the calipers, I'm still leaft with a fat-puppy brake pedal. I bled in the correct order, too. They never used to be this way, what gives?
I assume there is still air in the system, by the way they feel. Am i missing something here?
I'm considering having it flushed and powerbled by a local brake shop, but i want to be sure before i spend $55 on it.
I assume there is still air in the system, by the way they feel. Am i missing something here?
I'm considering having it flushed and powerbled by a local brake shop, but i want to be sure before i spend $55 on it.
Comment