Announcement

Collapse
No announcement yet.

heat problems!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • heat problems!

    ok well its starting to get cold here in canada, and i dont have a winter car yet and have no heat in teh zed!
    the problem seems to be the controle panel, the hot air will only blow on the top vents by the windsheild!, when i press any other button it wont switch to the other vents!

    anyone have an idea what should be done?
    im starting to think that the control unit itself died, the car does have like 350000kms
    http://www.youtube.com/user/onefast87

  • #2
    It's most likely a vacuum leak. It's either in the engine bay, or underneath the dash.
    It may not be a Z, but it's still got a turbo...

    Comment


    • #3
      If you trace it to under the dash, check the recirculation solenoid first, as they often tear and leave you with a big leak.
      Chuck Stong
      300+ Parts and Performance owner
      http://www.300-plus.com
      2002 ZCOT president and always active member

      Comment


      • #4
        The switching problem sounds to me like a control unit problem. You can probably find one in a bone yard or on e-bay for cheap.

        Check the water cock valve on the passenger side rear of the e-bay that the lever is moving when you switch to heat. That can be a good indication of where to start.

        This could be helpful:

        http://users2.ev1.net/~jboykin/vaclines.htm
        Just stand back and throw money.
        Performance costs money.
        Reliable performance costs more.

        Comment


        • #5
          thanks guys i found a vacuum line that blew off!

          also i noticed another problem with my heat!
          it seems that when im driving the heat works fine but when boost hits i can feel the hot air stop until its done boosting!
          im very confused but at least i have heat again!
          http://www.youtube.com/user/onefast87

          Comment

          Working...
          X