oxygen sensor sizes

[Dave88SS]

Are the Zirconium and Titania sensors the same respective size for the years they were used? Or all T3 cars the larger size and T25 cars the smaller size?

I need to put a 88T compatible o2 sensor in an 85T o2 elbow, if say the 86T sensor will fit where the 85T was I'll only have to fight one sensor out

Thanks

[Russ84na]

Dave this may answer your question

http://www.redz31.com/pages/fuel/ecucompatibility.html

[crowbar]

Dave88SS wrote: Are the Zirconium and Titania sensors the same respective size for the years they were used? Or all T3 cars the larger size and T25 cars the smaller size?

I need to put a 88T compatible o2 sensor in an 85T o2 elbow, if say the 86T sensor will fit where the 85T was I'll only have to fight one sensor out

Thanks

You are mixing things up in the first part of the question(s).

A 88T compatible O2 would mean a smaller sized O2 sensor which would fit in a bung in a larger sized 22mm elbow. So just get a bung?

Then you say 86T? 86 NA and 86T use the same O2 sensor.

[Dave88SS]

Russ84na wrote: Dave this may answer your question

http://www.redz31.com/pages/fuel/ecucompatibility.html

dammit, I was looking for that page. I found this one: http://www.redz31.com/pages/fuel.html that didn't have sizes on it.

Thanks Russ

[Russ84na]

You comming out to autoX on Saturday? If not this weekend then next weekend is under the lights. First car off hopefully by 6:00PM so every one gets one heat when it is light and one in the dark.

http://www.myautoevents.com/pls/mae/frm ... 1264420829

[Dave88SS]

Russ84na wrote: You comming out to autoX on Saturday?

maybe next weekend.

I might even have the Z back together. I popped another t25 on and promptly locked it up, so now I'll try a t3.

which reminds me, I need to call turbonetics again and bitch at them. :roll: