Announcement

Collapse
No announcement yet.

Engine break in.......................................

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine break in.......................................

    Whaddup ya'll,

    I like this dudes write up allot. Even if you don't agree this is a great read. http://www.mototuneusa.com/break_in_secrets.htm Peace
    Ucked Fup!!!

  • #2
    I couldn't resist getting on it in my titan when I first bought it. I didn't run it -hard- but yeah. The only thing that the manual specified was not to go over a certain rpm before 300miles, then another until 1000, or something along those lines. For the most part I stuck to it, but I'm not gonna lie... I did a few 6k runs on the engine during that time. Whatever works though!
    Daily:
    09 2.5SL Altima Grey
    08 4.0SE Pathfinder 4x4 Grey
    11 Ducati Diavel Carbon Red
    Z31s:
    88t Grey
    86t Pewter

    Comment


    • #3
      Interesting, that is basically the feedback I got from the guy I had rebuild my heads and a local high performance engine builder.

      Warm it up good, let it idle a bit high (1K) for about 10 minutes and then go drive it hard for about 15 minutes, but don't thrash it. Take it up to about 75% of red-line a few times for short periods as you are driving. Go home and then let it idle and cool out for about 10-15 minutes. After that try to stay below about 75-80% (5500rpm)of red-line for a thousand miles and after that let her rip. :wink:

      I have to say, I worked like a champ for me. After over 3500 miles with some hard driving mixed in the engine still has that tight new engine sound. (you know what I mean if you have heard it before).

      One other thing. Both guys told me to use the best natural oil I could get. They both suggested Chevron Delo 400. (worked for me since my old man had been using it since I was a kid in all his equipment) Run that for 500 miles. Drain it, and flush it with 2 quarts of the same to get the wear junk out as best you can. Then choose a synthetic and stick with it. Change it after 2k and then you should be good for 5K+ from there on. I have used Schaffers for years and they both agreed that it was better than most so I stuck with it. Both guys were also fans of Redline oils as well.
      Just stand back and throw money.
      Performance costs money.
      Reliable performance costs more.

      Comment


      • #4


        That guys not greasy enough, he cannot be trusted! lol jk
        http://youtube.com/c/zcartube

        Comment


        • #5
          Talk to enough people, and you will hear all kinds of ways to break in motors.
          Attached Files
          Chuck Stong
          300+ Parts and Performance owner
          http://www.300-plus.com
          2002 ZCOT president and always active member

          Comment


          • #6
            Yeah just build it and then drag it. Duh.
            85 Z31 6.0 LSX turbo 766whp/792wtq
            04 GTO, LS6, big cam, porting, N20... underway for summertime daily driver.

            Comment

            Working...
            X