-
Can I ask where'd you get the 1.25" Spacers?DavidA wrote: More pics soon
2+2s need at least an 18" wheel or drag steelies :-?
Why do 2+2's need 18" wheels :cry:
I was thinking 17's with the stance coils
Sharpen047 wrote: toe is off by 1 degree between both wheels, camber mod done and have another subframe being welded here in the next few weeks to correct it all. 1.25" spacers but if i go lower front or rear it will rub even if i roll the fenders. will hit tread on quarter panel with more spacer. would go lower but there are speed bumps right outside my house and i can hear the rails touch as it sits now ha.
I need for 4 lug but if I can't find it, I'll just do the 5 lug conversion.. -
i went with an ebay brand, paid extra for grade 8 studs and t6061 billet aluminum. I ordered a few pair so i got a discount and paid about 120 for my four total. Spacers are 1/2" thick at the thinnest spot so im not worried about failure like the cheap..er..ies..? -
hmm sounds good lolSharpen047 wrote: i went with an ebay brand, paid extra for grade 8 studs and t6061 billet aluminum. I ordered a few pair so i got a discount and paid about 120 for my four total. Spacers are 1/2" thick at the thinnest spot so im not worried about failure like the cheap..er..ies..?
the rims I want have a +35 offset in the front, good lord..
Priority is to get the Stance covered, then the wheels, buhaha
https://fund-solvaren.com. -
Why at least 18"? Because they look small on this car. look at my older one, these are white 18" and they look tiny.
COMMAND AWESOME -
What's up with the front caster?86na - BlueZ
Shiro #366 - Kouki Monster
85t - Mr Tickles -
S13 front conversion or had his spindles on the wrong sideadamvann3 wrote: What's up with the front caster?
1988 300zxt. gt35, stance, etc. Wheels: Varrstoen ES2 18x9.5 et-13 225/40. 18x10.5 et0 245/40
1990 jetta vr6'd -
[quote]DeleriousZ wrote:Yes I am aware of the usual circumstances, just curious what direction the OP wentOriginally posted by adamvann386na - BlueZ
Shiro #366 - Kouki Monster
85t - Mr Tickles -
Unfortunately, this is the stance that mine has taken for the past 2 weeks.
-
your getting there dudeSon of Lars wrote: Unfortunately, this is the stance that mine has taken for the past 2 weeks.
87T, My build thread http://z31performance.com/forum/z31-…lee-s-87t-rb26 -
My new Stance:
Gonna order up some ichiba spacers today for the rear and then drop it another 1-1.5"
Edit: Scraped the rail on a drive today when I wasn't careful going over a road crest, think if I go lower it will have to be only a half inch more max to keep it bearable around the city. -
I like those wheels. Looks nice. -
Nice!
-
Thanks man. I was lucky the wheels came with the car, some kid in the boonies I bought it from was wanting the money back he paid for wheels & tires when he sold it to me. I still can't figure out the manufacturer but I assume they are old american racing wheels. I got an allignment today and any lower on the rear would hurt the handling more than it's worth. The rear will be fixed by multi-link swap but for now it's not terrible & I have tires to burn. The front is already where I want and I a bit lower would be fine as long as no bump-steer problems arrise.Greasedmonkey wrote: I like those wheels. Looks nice. -
That's about where I want mine for now as well. I have to get the s13 stuff to go any lower for my liking. -
More Shots Later, but here is a nice side view.
1986 RB20 300xz 2+2
Copyright © 2006–2025. All rights reserved. Privacy Policy