door hinge/hinge pin replacement.

  • Chris86NA2T
    Chris86NA2T
    Senior Member
    • 837
    #1

    door hinge/hinge pin replacement.

    My door hinges have some play in them and i was looking into changing the hinge pins. In nissan FAST i can only find the complete hinge assembly. There are 4 hinges at 40 bucks a piece. Does a hinge pin replacement exist? If not, does anyone have an alternative to buying 4 new 40 dollar hinges?
  • Russ84na
    Russ84na
    Senior Member
    • 700
    #2
    Chris86NA2T wrote: My door hinges have some play in them and i was looking into changing the hinge pins. In nissan FAST i can only find the complete hinge assembly. There are 4 hinges at 40 bucks a piece. Does a hinge pin replacement exist? If not, does anyone have an alternative to buying 4 new 40 dollar hinges?
    I have 4 off an 84 coupe. Used, they seemed fine when I took them off. I will check them again if you are interested.
    …and how much HP do you have at 0 boost
  • mylittlez
    mylittlez
    Member
    • 78
    #3
    this ain't no chevy that the pin bushings are designed to wear out in. gotta do the whole hinge. seems to have taken at least 20 years to happen though. instead of 4-6 like chevy
  • Racinjitter
    Racinjitter
    Z Force Commander
    • 3128
    #4
    I have never seen just the pins. By looking at the spare doors I have, it looks like they are rivets not pins. I too need to replace my hinges on my black car.
    Shiro Special # 981 Being assembled in my spare time Chromoly acquired!
    Originally posted by BoostedMamma
    Heads up makes teh panties drop. BUT I don't have a penis OR a fast car, so I guess my opinion doesn't count.
  • Kennedy
    Kennedy
    Senior Member
    • 1158
    #5
    Racinjitter wrote: I too need to replace my hinges on my black car.
    Same here.. They are asking 150euros/hinge ($210) in here.
    So someone might know where i'm going to order my new ones :nanan?re
    Jukka Kivinen - Europe / Finland - '88 Turbo 2+2 Targa
    Datsun Nissan Sports Cars of Finland
    http://www.z31turbo.com / http://www.z31na.com
  • Racinjitter
    Racinjitter
    Z Force Commander
    • 3128
    #6
    Kennedy wrote: Same here.. They are asking 150euros/hinge ($210) in here.
    So someone might know where i'm going to order my new ones :nanan?re
    LOL, let us (me) know. :lol:
    Shiro Special # 981 Being assembled in my spare time Chromoly acquired!
    Originally posted by BoostedMamma
    Heads up makes teh panties drop. BUT I don't have a penis OR a fast car, so I guess my opinion doesn't count.
  • 1SIKZ31
    1SIKZ31
    Senior Member
    • 1236
    #7
    Chris86NA2T wrote: My door hinges have some play in them and i was looking into changing the hinge pins. In nissan FAST i can only find the complete hinge assembly. There are 4 hinges at 40 bucks a piece. Does a hinge pin replacement exist? If not, does anyone have an alternative to buying 4 new 40 dollar hinges?
    Chris give me the part number and I will see about ordering them myself and getting an employee discount!
    I pay cost + 10% and will charge you 0 dollars over what they charge me, all I ask is you pay for shipping.
    Tell me those part numbers though and Ill find out for you!
    PM me or ill probably never remember this thread :-/
    1SIKZ31 -86 SlickTop- R.I.P. 03/01/10 … Parted out :-(
    … New Project: LS1 Miata. Complete. 510whp. 2500lbs.
    1 Month Away from Rear Mount 76 --> 650-700whp.
  • reddzx
    reddzx
    Senior Citizen
    • 6440
    #8
    I have a couple of good sets off 87-88 cars if anyones interested.



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215
  • mylittlez
    mylittlez
    Member
    • 78
    #9
    jeez i ordered mine from local dealer and it was like 60 or 65 dollars for the pair, gonna be kind of high to ship they are a little heavy. I don't remember price for sure its been like a year. wasn't too much though
  • reddzx
    reddzx
    Senior Citizen
    • 6440
    #10
    $30 a pair shipped



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215
  • Racinjitter
    Racinjitter
    Z Force Commander
    • 3128
    #11
    IIRC the top hinge is identical to the lower hinge. But different from drivers side to passenger side.
    Shiro Special # 981 Being assembled in my spare time Chromoly acquired!
    Originally posted by BoostedMamma
    Heads up makes teh panties drop. BUT I don't have a penis OR a fast car, so I guess my opinion doesn't count.
  • Kennedy
    Kennedy
    Senior Member
    • 1158
    #12
    8+ Years BUMP.

    Anyone replace those pins recently? Any aftermarket parts that might fit from another Nissan?
    Jukka Kivinen - Europe / Finland - '88 Turbo 2+2 Targa
    Datsun Nissan Sports Cars of Finland
    http://www.z31turbo.com / http://www.z31na.com
  • kaur
    kaur
    Senior Member
    • 310
    #13
    Originally posted by Kennedy View Post
    8+ Years BUMP.

    Anyone replace those pins recently? Any aftermarket parts that might fit from another Nissan?
    You can try and ask them if their suppliers have the parts. They both sometimes list parts that are NLA. These are complete hinge assys and you would need 4 in total so it wouldn't be too cheap..

    https://www.partacus.de/ersatzteile/…tno=8040101P00
    https://www.partacus.de/ersatzteile/…tno=8040001P00
    info@partacus.de

    https://www.amayama.com/en/search?q=8040101P00
    https://www.amayama.com/en/search?q=8040001P00