figured I would post pics of my progress from start until I am done. and this is where I am so farand yes, I know my engine bay is dirty as crap)
Announcement
Collapse
No announcement yet.
my (stock) vertical radiator progress:
Collapse
X
-
yeah Ill post some more pics tommorow. tired right now. got abit sunburnt from being out working on the z all day. went pretty well though. hood closes well and all that jazz. amazingly i can still( if I wanted) get my electric fan between the radiator and motor. little tight but fits. and it looks to be leaving more than enough room for my intercooler and piping without having to mod anything else.1984 300zx Ae Turbo(under repair...)
1989 240sx rb20(daily driver)
Comment
-
got the radiator mounted vertically and test fitted the intercooler. so now basically the intercooler is in the stock location for the radiator. so with the bumper on, it looks completely stock.sweet. its been a big pain working on the z today. and for some reason mesquito's(sp?) were freakin horrible. now gotta take the 'cooler back out and straighten all the fins back out(someone decided it would be nice to lay something on top of it...) and strip all that dang black paint off of it. and yes its held up by zip ties, but that was just for "mock" up. was so tired at one point that i just ignored the the dry pinestraw under the car and set a small patch on fire while welding.
1984 300zx Ae Turbo(under repair...)
1989 240sx rb20(daily driver)
Comment
-
Awesome! I'm considering doing this as well. I have my front bumper off, and I need to mount one of the various intercoolers I have.
Jason - that's not the big npr aftercooler. I have one and it's ridiculous. From tip to tip it's about 14x34.Lance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Comment
-
Jason84NA2T wrote: That's sure an interesting way to do it. I want to see how you route the piping. Is that the "Big" Isuzu NPR assembly I see there? Those things are good to something like 500+whp.
not sure if its the big intercooler or not but but it measures 16 1/2 inches in width, 24 inches in length and 2 1/2 inches wide.1984 300zx Ae Turbo(under repair...)
1989 240sx rb20(daily driver)
Comment
-
Lance wrote: Awesome! I'm considering doing this as well. I have my front bumper off, and I need to mount one of the various intercoolers I have.
Comment
-
[quote]300zxt wrote:Originally posted by LanceAwesome! I'm considering doing this as well. I have my front bumper off, and I need to mount one of the various intercoolers I have.
You dont HAVE to relocate the radiator to install a FMIC... I fit a 24" x 12" x 3" size intercooler in my 86 whilst retaining the stock radiator in the original position, it can be done!1984 300zx Ae Turbo(under repair...)
1989 240sx rb20(daily driver)
Comment
-
[quote]300zxt wrote:Originally posted by LanceAwesome! I'm considering doing this as well. I have my front bumper off, and I need to mount one of the various intercoolers I have.
You dont HAVE to relocate the radiator to install a FMIC... I fit a 24" x 12" x 3" size intercooler in my 86 whilst retaining the stock radiator in the original position, it can be done!Lance 'never-ending 88na2t project' Landry
I sell Z stuff when I'm not being lazy.
Trace cell phones via GPS: http://www.phonetrace.org
Comment
-
i was wondering how efficent that set-up woould be vs the normal slung low intercooler. i've just heard that the Z31s have massive heat soak so wouldnt you want it taking up as much cold air as possible?DD:
86 Black Turbo 5spd
The Fallen:
84 red n/a auto Slicktop, 86 Black 2+2 n/a 5spd
Parting Currently:
86 White Turbo 5spd, 88 n/a 5spd, 84 AE, 88 Shiro #64
Garage Sale
Comment
-
AzureblueZ wrote: 300zxt - But didn't you have to cut up your front bumper??
85 Z31 6.0 LSX turbo 766whp/792wtq
04 GTO, LS6, big cam, porting, N20... underway for summertime daily driver.
Comment
Comment