S13/S14/S15 Subframe Conversion Kit GB-STANCE MULTILINK!!

  • Butter
    Butter
    Senior Member
    • 1519

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    Meanwhile, at Chungingzhou…


    …not afraid of welding. Taking America by storm.
    sigpic
  • badboyz31
    badboyz31
    Senior Member
    • 2403

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    Only reason I have backed out of getting the kit is because I could not wait and went ahead and did the install so I have the whole swap finished already, only difference with my install is where the studs are there is that plate welded all the way across on top and bottom and bolts ran all the way through with solid mounts up front, for the back and for the diff!
    1uz Swapped, lowered, flaked out '86 z31
    '72 Datsun 510 4dr, ka24de-T, slammed resto mod
    '84 z31 turbo, coils, wheels a.k.a the gfs weekend car
    '86 na2t parts for now a.k.a eventually will get running with a/c daily
    '83 280zx project backburner a.k.a ls turbo drag car one day
    Custom vg30et tube chassis drift exocet project
  • Gritt
    Gritt
    Senior Member
    • 565

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    did i miss the final cost amid all the whining about welding?

    Exercising my constitutional right to be awesome

    1.5.2. Podium winning cars do NOT need to be running at the checkered flag
    good thing....
  • skeeter
    skeeter
    Senior Member
    • 130

    Re: S13/S14/S15 Subframe Conversion Kit GB-PAY YOUR BILL

    ^ Yes you have on page 8.

    Mike_GruiZinga wrote: Pricing is released. Final kit price is $190 shipped to continental USA. You put down a $50 deposit, this means you owe a remainder of $140. Please pay your bill (mike_Gruizinga@yahoo.com) and make sure the shipping address is correct.
  • RXGhost
    RXGhost
    Senior Member
    • 510

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    and don't forget to get the bushings also
    1984 300ZX - 1988 VG30T Engine, Trans, Diff, ECU
    1987 300ZX TURBO - ( Parts Car ), 1988 300ZX TURBO - ( Parts Car )
    1972 240Z -- Full restore - L28ET L6 Engine from 280zx, T-5 transmission, Rear diff from the 87
    1998 Mazda B-2500, And a lot of bikes
  • ShamWow
    ShamWow
    Senior Member
    • 1905

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    List updated as of today, 2:30pm EST.

    Please include your SN with payment, otherwise it can be a little confusing.

    Also please allow extra time for shipments and be patient. I work full time and am only one man.

    …now off to find some packaging material in bulk!!
    "produce first.talk second."
  • RXGhost
    RXGhost
    Senior Member
    • 510

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    sweet we have enough for stance bushing discount
    1984 300ZX - 1988 VG30T Engine, Trans, Diff, ECU
    1987 300ZX TURBO - ( Parts Car ), 1988 300ZX TURBO - ( Parts Car )
    1972 240Z -- Full restore - L28ET L6 Engine from 280zx, T-5 transmission, Rear diff from the 87
    1998 Mazda B-2500, And a lot of bikes
  • Greasedmonkey
    Greasedmonkey
    Senior Member
    • 516

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    I couldnt make it into the initial line up, but will this be available again? Like a second run or something to that nature. I do have access to a fabricator/welder so Im not scared.
  • Careless
    Careless
    Senior Member
    • 13279

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    Greasedmonkey wrote: I couldnt make it into the initial line up, but will this be available again? Like a second run or something to that nature. I do have access to a fabricator/welder so Im not scared.
    you can buy mine for 500 bucks.
  • 87TurboZ
    87TurboZ
    Senior Member
    • 133

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    If anyone backs out PM me Ive been looking to do this swap but just saw the thread :banghead and I will need the s14 conversion bushings if i could still get in on that let me know
    4/87 Red turbo (DD Until the 84 is done) http://z31performance.com/forum/…p?f=13&t=25200
    86 NA Long gone
    1/87 White turbo (parted out)
    84 Turbo Vg33 holset HX35 http://z31performance.com/forum/…p?f=13&t=25315
    85 Turbo (Sold)
    93 Q45 Sold
  • depth
    depth
    Junior Member
    • 2

    Re: S13/S14/S15 Subframe Conversion Kit GROUP BUY

    Mike_GruiZinga wrote: HAHAHA.

    Okay your right I forgot, deadbeat Z31 owners forum.

    Lets say, if you pay the deposit, and I make you a kit, you will have 4 weeks to come up with the remaining $100 or $150 or whatever… After that I am selling it to someone else
    and not giving you ANY refund. :bombe
    If that happens, I'd like to be the someone else. . let me know

    depth
  • ShamWow
    ShamWow
    Senior Member
    • 1905

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    I've had a number of people interested in more of these.

    I have a couple extra kits, not sure how many. Will post on ebay for everyone to bid on after the group buy is all wrapped up.

    Havn't shipped any GB parts, packaging materials are taking longer to get than expected. Hopefully the packaging shows up by the end of the week so I can start packing everything up.

    If you havnt paid yet, please do so ASAP.
    "produce first.talk second."
  • Greasedmonkey
    Greasedmonkey
    Senior Member
    • 516

    Re: S13/S14/S15 Subframe Conversion Kit GB-Pictures and WHY! pg6

    Ive already stated I wanted one. I have $200 right now as well.
  • ShamWow
    ShamWow
    Senior Member
    • 1905

    Re: S13/S14/S15 Subframe Conversion Kit GB-Packaging and Pics

    Packaging came in finally, started assembly line with 2 other guys packaging this stuff up. I think the packaging is pretty efficient, and I sprayed all the steel down with anti-corrosion oil.

    Some Final pictures of kit as being boxed up:





    Did you notice I even took the time to include expensive distortion nut hardware for the rear studs? have sick party lights on this garage table for ultimate beer pong?
    "produce first.talk second."
  • Greasedmonkey
    Greasedmonkey
    Senior Member
    • 516

    Re: S13/S14/S15 Subframe Conversion Kit GB-Packaging and Pics

    I just want to be able to get mine.... Hopefully!